PROPERTIES:

Sprayable Release Agent containing hydrocarbons

ADVANTAGES:

Excellent release

Minimal cleaning stops

Paint compatible

Economic in use

PROCESSING:

Contents of drum must be well stirred before and during use.

The Release Agent should be at room temperature before processing.

We recommend using air assisted spray guns.

Before first coating is applied the mould should be cleaned with an ACMOSOL Mould Cleaner.

Before first foaming the Release Agent should be applied two or three times and allowed to flash off before each coat to give a good base coating.

STORAGE:

Stir up thoroughly before use. Do not store outdoors. Protect from heat and cold. Container is pressurized. Open with care. To use only under permanent stirring.

Storage temperature: between 10° C and 30° C.