产品分类
  • 联系人:SKY_SHEN(沈先生)
  • 手机:13301988108
  • 电话:021-20228097
  • 传真:86-021-51685756
  • 邮箱:616787719@QQ.COM
  • 地址:浦东金桥开发区金高路2388号金海商业广场813室
您当前的位置: 网站首页 > 产品展厅 >ORAPI POWDER OR 05
ORAPI POWDER OR 05
  • 品牌:ORAPI
  • 发布日期: 2023-03-24
  • 更新日期: 2024-07-19
产品详请
品牌 ORAPI
是否危险化学品
型号 ORAPI POWDER OR 05
别名 ORAPI POWDER OR 05
密度 1.3g/cm3
英文名称 ORAPI POWDER OR 05
产品等级 其他
纯度 45%

More than 98 % pure micronised molybdenum disulphide powder, packed in bulk for the pre-treatment of all metal or plastic assemblies prior to assembly.

Anti-wear treatment :

- Facilitates running-in, reduces friction forces, prevents seizing, prolongs the life of parts.

- The film formed is not excessively thick and therefore there is no mechanical slack.

Protection against contact rust and friction :

- Applying OR 05 considerably delays the appearance of the "fretting" phenomenon.

- Bearing rings, cone assemblies, oscillating joints etc.

Does not attract dust because it creates a dry film.

Keeps the same aspect from -200°C to +450°C unlike oil and grease which harden in the cold and liquefy in the heat.

Applications :

- Compressed gas cylinders and valves, including oxygen, as well as mechanisms, pressure reducing valves and pipe connections.

- Static or dynamic mechanical parts in use incompatible with liquid or plastic lubricants.

- Automatic weapon mechanisms, guns and ammunition.

- Mechanisms operating in a dusty environment, threaded or non-threaded assemblies to facilitate installation and subsequent dismantling, eliminating contact rust.

- It should be noted that without air, the product remains effective even if the parts are heated to a temperature of around 600°C.

- Cold and other fittings to facilitate assembly and reduce exertion.

- Various mechanisms subject to significant variations in temperature, making it almost impossible to use liquid or plastic lubricants.

- Dry lubrication of rotating or sliding seals made from synthetic materials, including pneumatic control systems not lubricated by traditional processes.

- Cryogenic lubrication.

- Cold forming : forging, wire drawing, etc.

- Can be used as additive in oil, grease and polymers to improve their friction coefficient.


纯度超过98%的微细二硫化钼粉末,在组装前批量包装用于所有金属或塑料组件的预处理。


抗磨处理:

-方便磨合,减少摩擦力,防止卡死,延长零件寿命。

-形成的薄膜不会太厚,因此没有机械松弛。


防止接触生锈和摩擦:

-应用OR 05大大延迟了“微动”现象的出现。

-轴承套圈、圆锥组件、摆动接头等。


不吸引灰尘,因为它创造了一个干燥的膜。

在-200°C到+450°C之间保持相同的外观,不像油和润滑脂在冷时变硬,在热时液化。



应用程序:

-压缩气体钢瓶和阀门,包括氧气,以及机构,减压阀和管道连接。

-使用中的静态或动态机械部件与液体或塑料润滑剂不兼容。

-自动武器装置、枪支和弹药。

-在尘土飞扬的环境中工作的机构,螺纹或非螺纹组件,以方便安装和随后的拆卸,消除接触生锈。

-需要注意的是,在没有空气的情况下,即使零件被加热到600°C左右的温度,产品仍然有效。

-冷却和其他配件,以方便组装和减少消耗。

-各种机制受温度的显著变化影响,几乎不可能使用液体或塑料润滑剂。

-合成材料制成的旋转或滑动密封的干式润滑,包括不通过传统工艺润滑的气动控制系统。

-低温润滑。

-冷成形:锻压、拉丝等

-可作为润滑油、润滑脂和聚合物的添加剂,以提高其摩擦系数。