Halocarbon 4.2 Oil/ 0.8 Oil/6.3 OIL /1.8 OIL
- 英文名称:Halocarbon 4.2 Oil/ 0.8 Oil/6.3 OIL /1.8 OIL
- 货号:Halocarbon 4.2 Oil/ 0.8 Oil/6.3 OIL /1.8 OIL
- 发布日期: 2020-07-16
- 更新日期: 2025-04-30
产品详请
货号 |
Halocarbon 4.2 Oil/ 0.8 Oil/6.3 OIL /1.8 OIL
|
品牌 |
Halocarbon
|
EINECS编号 |
Halocarbon 4.2 Oil/ 0.8 Oil/6.3 OIL /1.8 OIL
|
是否危险化学品 |
|
型号 |
Halocarbon 4.2 Oil
|
CAS编号 |
|
别名 |
Halocarbon 4.2 Oil/ 0.8 Oil/6.3 OIL /1.8 OIL
|
密度 |
g/cm3
|
产地/厂商 |
Halocarbon
|
英文名称 |
Halocarbon 4.2 Oil/ 0.8 Oil/6.3 OIL /1.8 OIL
|
产品等级 |
其他
|
纯度 |
%
|
分子式 |
|
Halocarbon填充液是惰性的非反应性液体,专门设计用于计量一系列有害化学物质和氧化剂,包括卤素,氧气,*和其他特殊气体应用。这些高质量的润滑剂可在与甘油填充压力表相同的温度范围内使用,某些等级的产品甚至可以承受更低,更*的温度。Halocarbon Fill Fluids are inert, nonreactive fluids specifically engineered for metering an array of hazardous chemicals and oxidizing agents including halogens, oxygen, chlorine, and other specialty gas applications. These high-quality lubricants are usable in the same temperature ranges as glycerin-filled gauges and select grades can withstand even lower, more extreme temperatures. Halocarbon Fill Fluids facilitate high-performance liquid-filled gauges through excellent dampening for steady needles, extreme temperature tolerance, and reduced discoloration over long-term exposure to harsh environments. Halocarbon Fill Fluids are also critical for use in measurement instruments with diaphragm seals where a broad range of chemical compatibles is required, and their low viscosities and extreme temperature tolerances are essential. Unlike traditional silicone fluids, Halocarbon Fill Fluids have a higher vapor pressure and eliminate contamination in applications such as water treatment or vacuum service.