![]() |
货号 | Kal-Gard Gun-Kote SCK 4 Grenn |
品牌 | Kal-Gard |
EINECS编号 | Kal-Gard Gun-Kote SCK 4 Grenn |
是否危险化学品 | |
型号 | |
CAS编号 | |
别名 | Kal-Gard Gun-Kote SCK 4 Grenn |
密度 | 12g/cm3 |
产地/厂商 | Electrolube |
英文名称 | Kal-Gard Gun-Kote SCK 4 Grenn |
产品等级 | 合格品 |
纯度 | 12% |
分子式 | PTFE Solid Film Kal-Gard Gun-Kote SCK 4 Grenn-- Everlube®6102G |
Kal-Gard Gun-Kote SCK will give you:
Corrosion resistance (1000 hrs at 5% salt spray)
Extremely good wear and abrasion resistance.
The coating is non reflective.
Specular reflection at 60 degree units = 1
Specular reflection at 85 degree units = 1
Excellent impact resistance. Minimum .375 inch deformation before loss of adhesion evidenced by crack and peeling of coating on upset area of panel when struck at .250 inch radius round impact rod.
Dielectric Strength. Minimum insulation with 50 VAP applied 1,100 MEG OHMS Insulation breakdown at 500 VAC min applied.
The coating is resistant to most acids and alkalines.
MIL-SS-3135 Standard test fluid Hydrocarbon 24 Hrs
MIL-G-5572 Aviation Gasoline grade 115/145 24 Hrs
MIL-H-5606 Hydraulic Fluid 24 hrs
MIL-J-5624 Jet Fuel JP-4 24 Hrs
MIL-L-6082 Lubricating Oil 24 Hrs
MIL-H-8446 Hydraulic Fluid 24 hrs
MIL-R-81294 Remover, Paint Epoxy System 24 Hrs
Everlube 6102G is a thermally cured, PTFE/MoS2 based solid film lubricant with a high molecular weight phenolic binder system. This coating enhances the torque/tension relationship in fasteners applications, which allows for a tighter clamp loads and less variability. Everlube 6102G is purchased by a wide variety of markets, ranging from Automotive to Medical.