Eldorado PR-3500 is a high-performance, solvent-based, viscous stripper, used to strip aircraft primers, epoxy, polyurethane, and other organic coatings from metal surfaces. PROPERTIES 1. Nonflammable 2. Low-vapor toxicity 3. Contains phenol and sodium chromate 4. Neutral pH 5. Safe on aluminum, cadmium, magnesium, ferrous alloys, titanium and highstrength steel. 6. Approved by or conforms to: MIL-R-81294,TyI,II &IV; AMS 1375, T.O. 1-1-8, Boeing D6, Douglas CSD #1, ARP 1755, China Aviation, Rolls-Royce, Embraer USE Works well at temperatures ranging from 45o to 95oF. Spray or brush undiluted PR-3500 paint stripper onto surface. Allow at least 15 minutes for the paint to be loosened. Agitate to dislodge loosened paint, then squeegee stripper residues and paint from the surface. Plastics sheeting placed under the aircraft have been found to be useful to facilitate the collection of paint stripper residue. PRECAUTIONS If PR-3500 accidentally contacts the skin, flood the affected area with water. If further treatment is required apply some ointment or salve to replace oils and soothe the skin. In case of contact with eyes, flush thoroughly with water and seek medical attention. PR-3500 must be used with adequate ventilation, due to the high-chlorinated solvent content. When application is made on a large scale, full wash rack gear—consisting of rubber boots, gloves, foul-weather gear, and facemask—should be worn to minimize contact of the material with the skin.