Suitable Coating Materials

Series 200 electroless nickel coatings can be successfully applied to most metal substrates of which include but are not limited to:

• Steel

• Stainless steel

• Iron

• Brass

• Bronze

• Copper

• Hastelloy

• Inconel

• Monel

• Nickel alloys

• Aluminum

Coating Thickness

Our Series 200, electroless nickel plating coatings are applied via a time controlled deposition process, which allows us to specify a wide range of thicknesses and hold tight tolerances. Depending on your application requirements, we routinely apply coatings as thin as 0.0002" per surface or as thick as 0.002" per surface, holding tolerancing within 0.0001" per surface. Our nominal thickness that we specify for the majority of our 200 Series coatings is 0.001", which is held within +/- 0.0002" per side.

Surface Finish (RMS)

200 Series coatings are uniform and extremely conformal in nature. With the exception of our Endura® 202HW process, the majority of our 200 Series coatings will replicate your parts’ surface geometries and mirror closely their existing RMS surface values.