- MOLYKOTE
- EVERLUBE
- DOWSIL
- DOW
- SANTOLUBE
- Tiodize
- Products Techniques ...
- Halocarbon
- Bonderite
- CHEMOURS KRYTOX
- 胶带
- 涂层
- 润滑油
- sandstrom
- ECL CHRISTO-LUBE
- ALSEAL
- Braycote
- SYN-TECH
- Whitford Xylan Coati...
- FUCHS
- LOCTITE
- 3M
- LUBRICANT
- ARMITE
- CLEARCO PRODUCTS CO....
- FRAGOLTHERM
- CHT
- Novagard
- Jet-Lube
- FRAGOL
- ACS
- Incotec
- Polyken
- Fluorolon
- Advanced
- 联系人:SKY_SHEN(沈先生)
- 手机:13301988108
- 电话:021-20228097
- 传真:86-021-51685756
- 邮箱:616787719@QQ.COM
- 地址:浦东金桥开发区金高路2388号金海商业广场813室
- 产地:ELDORADO PR-5044 i
- 发布日期: 2018-08-30
- 更新日期: 2024-04-25
EINECS编号 | ELDORADO PR-5044 i |
英文名称 | ELDORADO PR-5044 i |
产品等级 | 23 |
纯度 | 98% |
别名 | ELDORADO PR-5044 i |
分子式 | ELDORADO PR-5044 i |
密度 | 1g/cm3 |
产地/厂商 | ELDORADO PR-5044 i |
ELDORADO PR-5044 is a non-drying, high performance, peroxide-activated paint and primer remover, for removal of durable polyurethane and epoxy paint systems. It is non embrittling with a low odor profile, allowing its use in maintenance environments. The material shows excellent performance on typical aerospace primers. Properties 1. Viscous liquid – clings to vertical and underside surfaces. 2. Contains no chlorinated solvents. 3. Very low evaporation rate, allowing application overnight. 4. Contains hydrogen peroxide (<7%). 5. Contains no hazardous air pollutants (HAPS). 6. Approved by or conforms to: BAC 5725, DPM 5549, Boeing D6-17487, Douglas CSD #1, Embraer, and WR-ALC Purchase Description Use Spray or brush PR-5044 onto the surface to be stripped. Dwell time is dependent upon temperature and airflow, but expect from 2-8 hours. Once stripper has loosened paint, squeegee surface to remove loosened paint and stripper residues. If second application of PR-5044 is required, apply after removing loosened paint if a single coat system, agitate with brushes if multiple coats. Once operation is complete, surface must be cleaned with alkaline soap. Surface must be cleaned with an alkaline material within 1 hour of stripper removal. When spraying alkaline soap, pay close attention to directing spray into skin laps and seams. Rinse all surfaces thoroughly. The preferred temperature for use of PR-5044 is 60°- 85°F. Low temperatures will see a reduction in performance. Important! All parts of application equipment that come in contact with PR-5044 must be made of stainless steel or plastic, such as PVC, polyethylene, or polyester. Use plastic buckets and synthetic bristle brushes. Do not contaminate PR-5044 with other paint removers, wipe solvents or chromates.